Crimson Trace SW Full Size Autos

Author: BLJs Enterprises  //  Category: Crimson Trace Laser Grips

Crimson Trace SW Full Size Autos

Crimson Trace SW Full Size Autos

Speed, Accuracy and Security Made SimpleNow AvailableWhether your full-size 3rd Gen. is 9mm or .40cal, Lasergrips add a new dimension of speed and accuracy. Crimson Trace grips for the double-stack S&W autos are a rubber wraparound design for comfort and feature dual activation buttons for positive control of the laser.

The LG-359 fits the Smith & Wesson Third Generation, large frame, full-size, double-stack, 9mm and .40 cal. autos including model #’s: 410, 410S, 411, 910, 910S, 915, 4003, 4003TSW, 4006, 4006TSW, 4043, 4046, 5903, 5903TSW, 5906, 5906TSW, 5943 and 5946

Crimsom Trace Laser Grips       Smith & Wesson

Advantage® 3000 Full Face Respirators

Author: BLJ's RSS Products Feeds  //  Category: Uncategorized

The Advantage 3000 respirators are designed to enhance a workers performance by allowing even lower breathing resistance, a standard nosecup that reduces fogging and a soft, pliable silicone facepiece. The scratch-resistant, wraparound lens is engineered to be optically correct and eliminate distortion for superior visibility and peripheral vision. Advantage 3000 uses the same cartridges and filters as the Advantage 200LS respirators.

The Advantage 3000 Full-Face Respirator incorporates MSA’s global engineering expertise and is designed to meet NIOSH and EN standards.
The respirator features a wraparound lens combined with a soft, pliable silicone facepiece that provides a total solution to your air-purifying respirator needs. Its fit technology is based on the proven faceseal of the Ultra Elite Facepiece, which was based on facial measurements from more than 8,000 people.

For the utmost in convenience, the Advantage 3000 uses the same cartridges and filters as the Advantage 200 LS Respirator. The Advantage 3000 Respirator enhances worker performance through a new design that allows even lower breathing resistance and includes a standard nosecup that reduces fogging in low tempera-tures or high humidity conditions.

In addition, the facepiece lens has a scratch resistant coating and has been engineered to be optically correct, giving you superior visibility and peripheral vision. The Advantage 3000 Respirator also meets the performance requirements of ANSI Z87.1.2003.

Donning the mask is made easier with pre-adjustable rubber straps. With the Advantage 3000 Respirator.

MSA Advantage 4000 Fullface Respirator, Hycar Facepiece

Author: BLJs Enterprises  //  Category: Gas Masks

MSA Advantage 4000 Fullface Respirator, Hycar Facepiece

Adapts to a wide range of respiratory applications: air purifying respirators (APRs), supplied air respirators (SARs) and powered air purifying respirators (PAPRs). Available in single- and twin-port models. The one-mask system allows for simplified fit tests, cost-savings and reduced inventory.

Facepiece is available in both silicone and Hycar rubber and work with 3 different adapters: Push-to-Connect (PTC), RD40 and Twin-Cartridge Adapter. Comes standard with a nosecup for reduced fogging in low temperature or high-moisture environments. Options include a rubber or net head harness.

NIOSH approved.

MSA Advantage 4000 Fullface Respirator, Hycar Facepiece, Large

CONFIGURATIONS

Single-Port Version with Twin-Cartridge Adapter can accommodate the complete line of Advantage® cartridges and filters. It may also be replaced with the PTC adapter or RD40 Adapter for different respirator applications.

Twin-Port Version contains special adaptable bayonet cartridge mounts in the lens that can be used with the complete line of Advantage cartridges and filters. With the RD40 Adapter, it may be used with MSA’s Duo-Twin™ respirators.

ADAPTERS

PTC Adapter offers a range of pressure-demand supplied air configurations, many available with optional escape cylinders. Ideal for MSA’s PremAire® System, AirHawk® MMR Air Mask SCBA, PremAire® Cadet Supplied Air and Escape Respirators.

RD40 Adapter covers a wide range of respiratory applications including supplied air respirators, PAPRs and gas mask configurations. Ideal for MSA’s OptimAir® TL PAPR, OptimAir® MM2K PAPR, Chin-Type Gas Mask, Constant-Flow® Airline Respirator and Duo-Flo™ Constant-Flow Airline Respirator.

Twin-Cartridge Adapter is used mostly for air purifying, constant-flow and supplied air applications. Depending on the application, the configuration will utilize either the Advantage Singleor Twin-Cartridge facepiece.

Welders Adapter provides protection for workers engaged in abrasive blasting. Consists of a hood, facepiece with lens housing, breathing tube, lens cartridge, flow-control device, air supply hose and support belt. Available with both Single- and Twin-Port Facepieces. Optional Auto-Change™ Electronic Welding Lens is an automatically darkening welding filter that provides welders a clear view and constant eye and face protection.

MSA Advantage 4000 Fullface Respirator, Hycar Facepiece, Large

Pepper Spray Guns

Author: BLJ's RSS Products Feeds  //  Category: Uncategorized

MACE PEPPER GUN uses an advanced delivery system utilizing patented Bag-in-a-Can Technology. This new system allows the pepper spray to spray like an aerosol in a continuous fashion from any angle, even when Pepper Gun is held upside down. Sprays 7 blasts up to 25 feet.

Trigger Activated LED Light
Allows for better aim
Temporarily disorients intruder
Mace Pepper Gun comes with: Pepper Gun dispenser, One 28 gram OC cartridge, One Water test cartridge and Batteries (for the LED light)
Available in 4 Colors!

Garrett PD 6500i™ Walk-Through Metal Detectors

Author: BLJ's RSS Products Feeds  //  Category: Uncategorized

The PD 6500i is the world’s highest performing walk-through metal detector and leads the industry with superior pinpoint technology and unmatched discrimination and sensitivity features. Designed for maximum patron throughput without compromising safety, the PDi is the walk-through of choice for security professionals worldwide.

The PD 6500i’s Access Control Panel is designed for use by authorized personnel with specific, multi-level security codes. It allows authorized users to change settings such as detection Program and Sensitivity. Security of the detector’s settings is maintained with a non-resettable sequence code, which indicates every attempt at access to the settings. A tamper alarm sounds within 10 seconds after the Access Touchpad is pressed, unless a proper access code is entered.
The PD 6500i maintains all settings even when disconnected from power and does not require recalibration each time the unit is turned OFF and back ON. No battery is required for memory retention. While the unit is in operation, a self-test of all systems is performed continuously with any failures or problems immediately reported on the LCD display.

Easy Assembly
The PD 6500i’s modular design allows for a quick and simple assembly of its 4 (four) sub-assemblies using only 8 (eight) screws and 3 (three) internal electrical connections.
33 Distinct Pinpoint Detection Zones
The PD 6500i offers exclusive multiple target pinpointing with 33 distinct zones for full target coverage on the left, center and right side of the body from head to toe.
Entry Pacing Lights
Smooth, efficient traffic flow with easy-to-view, eye-level pacing lights with international “wait” and “proceed” symbols on the entrance side of each panel.
Overhead Control Unit
LCD Display, alarm lights, LED bar graphs and control touchpads plus all wiring, connections and electronics are integrated into a single lockable overhead compartment which eliminates exposure of wires and external control box.
Multi-dimesional Coil Design
The PD 6500i’s exclusive multi-dimensional coil design provides unmatched detection of potentially lethal metal items such as guns, knives and other flat and rod-shaped weapons regardless of location and orientation.
Audible and Visual Alarms
Audible alarm and Visual LED lights signal when a target has been detected.

EMI “The Ultimate 5 – In – 1 Fire/Rescue Tool”

Author: BLJs Enterprises  //  Category: Emergency Responder

 

The Ultimate 5-in-1 Fire/Rescue Tool

EMI has recognized the need for a versatile yet convenient multi-use fire/rescue tool.   In response to this need EMI has introduced The 511 Tool.

Capable of five different functions; adjustable hydrant wrench; spanner wrench; gas shut-off tool; pry axe head; striking hammer head, this tool is essential gear for all firefighters and emergency first responders. The 511 Tool is manufactured of high strength treated alloy. It is also non-sparking, corrosion resistant, light weight and can be worn easily on a truckmans belt.

Features:

  • Adjustable Hydrant Wrench

  • Spanner Wrench

  • Pry Axe Head

  • Gas Shut-Off

  • Residential Commercial

  • Striking Hammer Head

Used by:

  • Firefighters

  • Haz-Mat Teams

  • Vehicle Extrication Teams

  • 1st Responders

  • Military

  • EMS Personnel

TASER M-26C

Author: BLJ's RSS Products Feeds  //  Category: Uncategorized

The TASER® M-26C is modeled after TASER’s
police model ADVANCED TASER M26.
Almost 100% take down capability.

It combines the injury reducing benefits of traditional stun technology with a quantum leap in stopping power via new Electro-Muscular Disruption (EMD) technology. In police studies, the new Advanced TASER® has a higher instant incapacitation rate than a 9mm hand gun. The TASER® M-26C shoots out 2 darts attached to 15 feet of wire. 50,000 volts travels over the wires and over-rides the central nervous system providing incredible takedown power.

MSA Cairns Fire Helmets 1010 Traditional Fire Helmet with 4″ Faceshield

Author: BLJs Enterprises  //  Category: Emergency Responder

MSA Cairns Fire Helmets 1010

Traditional Fire Helmet with 4″ Faceshield

MSA Cairns Fire Helmets 1010 Traditional Fire Helmet with 4

MSA Cairns Fire Helmets 1010

 Traditional Fire Helmet with 4″

 

 Faceshield

A tough, high-temperature shell makes these traditional Cairns fire helmets immune to chipping and cracking. Plus, it rides low on the head for superior clearance and maneuverability. Included helmet hanger easily fits large hooks and racks.

Crimson Trace Laser sights for for Kel-Tec P-3AT and P-32

Author: BLJs Enterprises  //  Category: Crimson Trace Laser Grips

Crimson Trace Laser sights for for Kel-Tec P-3AT and P-32

Fits Models:     Kel-Tec P3AT and P32 pistols

Introducing our first under-barrel Lasergrips model, the LG-430.  This unique design mounts onto the trigger guard and locates the laser diode directly under the muzzle.

Crimson Trace Laser sights for for Kel-Tec P-3AT and P-32

A front-located pressure switch activates the laser when the gun is held in a normal firing grip.

Fully adjustable for windage and elevation, the LG-430 is the sleekest, most fully-featured laser sight for Kel-Tec pistols.

Activation Instinctive Activation; Front, Middle Finger
Material Rugged Hard Polymer
User Adjustable Yes, Both Windage and Elevation
Warranty 3 Years Complete
Beam Intensity 5mw peak, 633nm, class IIIa laser. Maximum output that federal law and technology allow.
Dot Size Approximately 0.5″ diameter at 50 feet.
Power Source One ea, 1/3N 3 V Lithium (or 2 ea V 357 1.5V Silver Oxide)

Zap Light Stun Gun Flashlight

Author: BLJs Enterprises  //  Category: ZAP Stun Guns

Zap Light Stun Gun Flashlight

 

It’s an actual flashlight with 6 ultra-bright LED bulbs, but it’s also a stun gun with an unheard of 1-million-volt charge that will knock down any attacker. They’ll think it’s just a flashlight until its too late. It’s even rechargeable and includes 120v/60Hz wall charger. Get one today to protect your family. Personal Security Products, ZAPLIGHT.

Crimson Trace Laserguard for Kel-Tec’s 9mm

Author: BLJs Enterprises  //  Category: Crimson Trace Laser Grips

Crimson Trace Laserguard for Kel-Tec’s 9mm

Bullet Goes Where Red Dot Is

Introducing our first Laserguard model for one of the big-3 pistol calibers; the LG-435 for Kel-Tec PF9.  This unique design mounts onto the trigger guard and locates the laser diode directly under the muzzle.  A front-located pressure switch activates the laser when the gun is held in a normal firing grip.

Crimson Trace Laserguard for Kel-Tec's 9mm LG-435

New Laserguard for Kel-Tec’s 9mm Pocket Pistol

Fully adjustable for windage and elevation, the LG-435 puts the confidence of Lasergrips behind the power of your 9mm.

Fits Models:     Kel-Tec PF9

 

Burris ELIMINATOR™ LASERSCOPE

Author: BLJs Enterprises  //  Category: Burris Hunting Scopes

Burris ELIMINATOR™ LASERSCOPE

BURRIS  ELIMINATOR™

 

 LASERSCOPE

 

 

 

Burris ELIMINATOR™ LASERSCOPE

 

No more guessing yardage or fumbling with a shaky handheld rangefinder. No more losing sight of your trophy. No more guessing holdover. The Eliminator knows the precise horizontal distance to your trophy and exactly what your cartridge will do. Eliminator lights a 1/3 MOA illuminated aiming dot showing exactly where your shot will go. With The Eliminator, just Range, Aim, and Fire.

 

 

 

The Burris Eliminator LaserScope is in a league of its own. No other riflescope combines this level of quality, technology, accuracy, simplicity, repeatability and effectiveness. It will greatly increase the distance at which you can be confident in making an ethical shot. You do the hunting and shooting, the Eliminator will do the memorizing and calculating. The Eliminator is affordable and of a size and weight that’s welcome for everyday field use. The revolutionary new Eliminator is a brilliant riflescope innovation that ensures long range hunting success.

 

 

As Per Burris: To Be On Market Mid Summer

 

                            

Eliminator Specifications
4x-12x-42mm
Laser Range* (yards reflective)
Laser Range* (yards deer)
Laser Accuracy
Batteries
Battery Life
Operating Temperature
Dot size @ 100 yards
Field of View Low-High (feet)
Exit Pupil (mm) Low – High
Click Value(Inch@100yards)
Max Adj. (Inch@100yards)
Weight with mount & battery
Optimum Eye Relief (Inch)
Objective End Dia (mm)
Clear Objective Dia (mm)
Ocular End Dia (mm)
Overall Length (Inch)
Mounting Rail Length
* Environmental conditions may limit range

800
550
+/- 1 yard
CR2
1100 cycles
14°F – 122°F
.33 MOA
25-9
10.5 – 3.5
0.25
50
26 oz
3 – 3.5
60
42
39
13
5.7
            
 

Hands Free 2-Wire Color Video Intercom System with 7″ LCD Monitor and Night Vision Security Camera

Author: BLJ's RSS Products Feeds  //  Category: Uncategorized

VIS300-7M2 is SVAT’s hands free 2-wire indoor/outdoor color video intercom system. It can make you feel secure when you or your children have to open the door for strangers. The convenient, compact system uses both video and audio to alert you when someone comes to your door. Hands free operation allows you to see and hear who is at your entrance before deciding whether or not you want to answer. The VIS300-7M2 is an effective and simple addition to your existing security system, and gives you an extra eye when protecting your property. Always be aware of what is happening at your business or home entranceway with the night vision camera that allows you to see in the dark, up to 8ft away. Mounting the camera and monitor is easy and effective due to the included angled mounts and built-in stand-you can set it up in minutes!
FEATURES
Works with your existing doorbell wiring so setup is fast and hassle-free
Safely identify visitors with audio and video before deciding to answer the door
Enjoy the convenience of hands free operation
Night vision camera gives you around the clock protection
Compatible with door strikes for ultimate security
Fast & Hassle-Free Setup
SVAT’s VIS 300-Series video intercom system is incredibly easy to set up and use. It can work with your existing door bell wiring, so you can do everything yourself within minutes (50ft cable included). The video, audio and power all run through two wires, so no additional or complicated wiring is necessary.

NcSTAR Illuminated Rifle Scope – 3-9×40E Rubber Coated

Author: BLJs Enterprises  //  Category: NcStar Scopes

NcSTAR Illuminated Rifle Scope – 3-9×40E Rubber Coated

Model# :   SEFFR3940R
 
Description :   3-9×40E Rubber Coated Scope / Ruby / Ring
 
Magnification :   3x-9x
 
Objective Dia. ( mm ) :   40.00
 
Tube Dia. :   30mm
 
Field Of View @ 100 Yrs ( Feet ) :   36.6-13.6
 
Eye Relief ( Inch ) :   2.76-3.15
 
Exit Pupil ( mm ) :   13.3-4.4
 
Ring Mount :   Yes
 
Lens Coating :   Ruby
 
Reticle :   P4 Sniper
 
N. W ( Oz. ) :   19.5
 
Length ( Inch ) :   12.2 
NcStar Rubber Armored Mark III Tactical Scope with Built in Red Laser

Cheetah Slim 650k Stun Gun

Author: BLJs Enterprises  //  Category: CHEETAH Stun Guns

Cheetah Slim 650k Stun Gun

 

Cheetah Slim 650k Stun Gun

Our latest 650kv stun gun. Compact size 3.5 inches long and 1 inch wide.

LED and Rechargable Plug into Wall.

 

Leather Case.

TASER M-26C

Author: BLJ's RSS Products Feeds  //  Category: Uncategorized

It combines the injury reducing benefits of traditional stun technology with a quantum leap in stopping power via new Electro-Muscular Disruption (EMD) technology. In police studies, the new Advanced TASER® has a higher instant incapacitation rate than a 9mm hand gun. The TASER® M-26C shoots out 2 darts attached to 15 feet of wire. 50,000 volts travels over the wires and over-rides the central nervous system providing incredible takedown power.

STUN WEAPONS: Traditional stun technology weapons operate in a 7-14 Watt range and interfere with the communication signals within the nervous system of the target. These stun systems primarily effect the sensory nervous system. Like static on the communication lines between the brain and the body, stun systems interfere with the human command and control systems. However, a small percentage of people with a very high tolerance for electrical stimulation can fight through the effect of these 7-14 Watt systems. The TASER® 44001 series is a stun weapon using the same settings used by law enforcement for over 20 years.
EMD WEAPONS: EMD weapons use a more powerful 16 – 26 Watt electrical signal to completely override the central nervous system and directly control the skeletal muscles. This EMD effect causes an uncontrollable contraction of the muscle tissue, allowing the M-Series to physically debilitate a target regardless of pain tolerance or mental focus.
The TASER® M-Series are EMD weapons — specifically designed to stop even the most elite, aggressive, focused combatants. Rather than simply interfering with communication between the brain and muscles, the TASER® EMD systems directly tell the muscles what to do: contract until the target is in the fetal position on the ground. The TASER® provides for maximum safety for both the user and the subject by bringing dangerous situations quickly under control before force escalates to lethal levels.

Cheetah 2.5 Mil Cyclone Stun Gun

Author: BLJ's RSS Products Feeds  //  Category: Uncategorized

NEW MODEL
Our Most power stun gun 2.5 mil with led.
Rechargable Plug into Wall.
4 inch long, 1.5 inch wide curve design.
Leather Case.
It’s boast’s 4 LED’s which is nice and bright. Best of all it features prongs on the tip.
Artificial leather case with magnet button allows quick and easy access.
Rechargeable
Ergonomic Design

GunVault Minivault Biometric

Author: BLJs Enterprises  //  Category: GunVault Handgun Safe

GunVault Minivault Biometric

GVB1000 Minivault Biometric

The GunVault Bio utilizes programmable biometric scanner technology to make accessing firearms and valuables faster and more secure than ever before. A high-performance algorithm is used to achieve quick identification of enrolled fingerprints while maintaining a very low False Reject Rate (FRR). The self-learning algorithm of the GunVault Bio adds new minutiae to the fingerprint templates each time a user touches the sensor. The system can handle up to thirty fingerprint templates.

GunVault Bio is constructed of tamper-proof, heavy-gauge steel and features a soft foam interior to protect its contents. The unique biometric keypad triggers an omni-directional spring-loaded door that not only has a high-strength lock mechanism, but also performs reliably, time after time.

The GunVault Bio 1000 features:

-Heavy-gauge steel housing
-Foam lining inside
-Tamper-proof, spring-loaded door
-Powered by a 9V battery – lasts one year under normal conditions
-Power connection jack for external AC or DC power supply (adapter included)
-Blinking low-battery light
-Audio and LED low battery warning
-Backup key for emergency access
-Interior courtesy light
-Mounting gear included
-Measures 8.1”W x 4.9”H x 12”D
-Weighs just 9 pounds

 

Shipping Dimensions
Weight: 11.2 pounds.
Dimensions: 8.5″ (W) x 5.25″ (H) x 13.25″ (D)
Weight Disclaimer: * Weight may vary based on configuration.

Manufacturer
GunVault

Blackhawk Pro-Shooters Mat

Author: BLJ's RSS Products Feeds  //  Category: Uncategorized

The BLACKHAWK!® Pro-Shooters Mat is ideal for any type of rifle, pistol or shotgun competition requiring multiple shooting positions. It rolls up to a tight and efficient carrying configuration. It has a unique hydration compatible pouch and tube routing system.

• Made of 1000 denier nylon
• .375” closed cell foam padding
• BLACKHAWK! Hydration™ compatible
• HawkTex™ shooting surface
• Shoulder strap with HawkTex™ shoulder pad
• Full wrap around heavy-duty carry handles

PLANO 10303 DELUXE TAKE-DWN SHOTGUN BLK

Author: BLJs Enterprises  //  Category: Plano Gun Cases

PLANO 10303 DELUXE TAKE-DWN SHOTGUN BLK

This classic case is fitted for takedown firearms. With an attractive alligator texture, the DLX Series of cases features strong durable full length piano hinges, a protective aluminum valance, fold-away handles and dual key-lock latches.

 

dosk_46521.jpg

  • Fitted for takedown firearms
  • Protective interlocking foam
  • Aluminum valance for added protection
  • Durable full length piano hinge
  • Key lockable latches
  • Swivel handles for compact storage
  • 38 x 12.5 x 4.5
  • Videos, Slideshows and Podcasts by Cincopa Wordpress Plugin