Crimson Trace Laser Grip
Beretta M9
These Crimson Trace laser grips are designed for the military workhorse, the Beretta M9. Crimson Trace torture-tested the Beretta M9 grips by immersing them in salt water baths, submerging them in water, and submitting them to pouring rains. These grips are tough!
The LG-402M laser grips feature a hard polymer design, with deep texturing on the grip panels for optimum control of the pistol when wearing gloves or in hot weather. The front-activated switches are easy to use, even while wearing gloves.
Laser activation by an pressure switch at the front
• Laser is user-adjustable for both windage and elevation.
• Features three-year full factory warranty
• Beam intensity is the maximum allowed by federal law. Beam Intensity is 5mw peak, 633nm, class IIIa laser.
• Laser dot size is approximately one-half inch in diameter at 50 feet.
• Requires two #2032 lithium batteries (included), which provide over four hours of on-time use and a five year shelf life
|
Weather Proof
|
MIL-SPEC 810F
|
| Activation |
Instinctive Activation; Front
|
| User Adjustable |
Both Windage and Elevation
|
| |
3 Years Complete
|
| Master On/Off Switch |
Yes
|
| Beam Intensity |
5mw peak, 633nm, class IIIa laser. Maximum output that federal law and technology allow.
|
| Dot Size |
Approximately 0.5" diameter at 50 feet.
|
| Power Source |
Two #2032 lithium batteries (included); over four hours of on-time use and a five year shelf life
|
Crimson Trace Part # LG-402M
|
CRIMSON TRACE Laser Grips 
